DOCACETAL C MT

Extruded rods, Plates

Color: 
black, blue, green, yellow, red

Special POM C used for medical technology. Very good sliding and abrasion behaviour. Resistant to organic solvents. Resistant to common sterilization methods and cleaning agents.

DOCACETAL C PE

Extruded rods, Plates

Color: 
blue

PE additives ensure excellent sliding properties and improved abrasion resistance.

DOCACETAL H

Extruded rods, Plates

Color: 
white, black

This homopolymer version has greater mechanical strength, rigidity, smaller thermal expansion and better wear resistance than POM-C, but is not as readily usable in watery, warm medium.

DOCACETAL H TF

Extruded rods, Plates

Color: 
natural

PTFE-filled POM-H. Due to the filling material, its characteristics are different from those of the POM-C and POM-H base materials. Due to the PTFE content, it is softer and not as rigid. Conversely, its sliding and wear properties are excellent. Even in the event of large loads and small speeds, sliding without “stick-slip” can be achieved.

DOCADUR

tubes, Extruded rods, Plates

Color: 
transparent, white, black, blue, red, yellow, grey, green

PVC is a flame retardant material with an exceptional chemical resistance and also with lower stress cracking. PVC-U shows high mechanical strength, tensile strength and the continuous operating temperature is from -15 °C to +60 °C. It can also be easily machined, glued and welded.

DOCADUR ESA-D

Extruded plates

Color: 
white

Improved toughness at low temperatures and UV protection.

DOCAÉSZTER VIVAK bronze


Color: 
bronze, translucent

50% light permeability at 4 mm sheet thickness. Not UV protected version.

DOCAÉSZTER VIVAK clear

Extruded plates

Color: 
clear, transparent

Optical quality, eliminates the unfavorable characteristics of PMMA (plexiglass). Technically and economically, it is an optimal intermediate between the PMMA and the PC materials. Extremely tough material, its formability and plasticity is better than that of PC. Not UV protected, basic version. It can be used in food industry, as well.

DOCAÉSZTER VIVAK UV clear


Color: 
clear, transparent

A version of the regular VIVAK sheet with UV protection on both sides, for outdoor applications.

DOCAFLON FEP


Color: 
natural, translucent

Available only for request. FEP belongs to the melt fusible material family. It has good diffusion coefficients to PTFE. FEP has excellent ductility and wide range of dimensions.

DOCAFLON MFA


Color: 
natural, translucent

Available only for request. Just like FEP it belongs to the melt fusible material family. It has excellent transparency among fluoropolymers. It has excellent chemical resistance.

DOCAFLON PFA


Color: 
natural, translucent

Among the fluoro-polymers PFA has excellent heat stability. Comparing to natural PTFE it has better creep resistance and mechanical properties. Welding is possible. PFA available in thin-walled tubes. Different colours are available.