DOCALENE HD500 R
high-density polyethylene + regerenerate

Product features

DOCALENE HD500 R offers the ideal combination of stiffness, leak-tightness, mechanical damping and abrasion resistance. It is also highly weldable. Besides food industry applications (certified), it is also found in mechanical, chemical and electrical applications.

White, Black

product family features

Polyethylene is one of the most common and widely used family of engineering plastics. In addition to its versatility of use, it is also popular for its low price - it can be just as suitable for certain applications as other, much more expensive materials.

The top grade is ultra-high molecular weight (UHMW) polyethylene, also known as HD1000 (HD = high density), or also referred to as PE HD1000 or simply PE1000, PE 1000 or UHMWPE. Its outstanding abrasion resistance and sliding properties make it a suitable material for wear parts or conductor rails. Other variants are HD8000 with improved properties and Robalon with extra wear resistance.

The next category is high molecular weight (HMW) polyethylene, or HD500, PE500, PE500, PE 500, PE HD500 or HMWPE. HD500 is popular in the food industry and where its outstanding impact resistance or wide range of colours is useful. Sheets are available in blue, red, green, yellow, brown, maroon and grey in addition to the basic white and black colours.

Both the HD1000 and HD500 have a version with partially recycled material. The HD1000 R is available in green and black boards; it has the characteristics to fit between the HD1000 and HD500 and can be an economical substitute for the native HD1000 in certain applications. Only sheets of the regenerate-containing materials are available, while the other material types are also available in rod format.

The lowest category of polyethylene is HDPE (also known as PE-HD, PEHD or HD300), which is an economical material for elements subject to less stress, such as cladding or support elements.

ELS (antistatic, electrically conductive) versions are also available for HD1000 and HDPE.

Polyethylenes are available in a wide range of sizes, typically in stock in sheets 1-120 mm thick and rods in diameters of 10-250 mm.

DOCALENE HD500 R

Some important features

  • High toughness (grooved Charpy - does not break)
  • Good sliding properties (m = 0.2-0.3, dry sliding on smoothed and ground steel)
  • Good machinability, weatherproof
  • Wide application temperature range: - 80°C to +110°C
  • Good damping capacity
  • Does not swell when wet
  • Relatively soft (Shore D hardness 60-65)
  • High thermal expansion
  • Good chemical resistance
  • Physiologically neutral, may come into contact with food and medicines

Main areas of application

Sliding bearings; sliding guides; cutting tables (food and leather industry); chutes and storage liners for handling granular materials; rollers; small load gears; insulators; shields in the electrical and nuclear industries, etc.

Machining technology

Turning (turning, milling, drilling, sawing): traditional metalworking tools and in some cases woodworking tools - carbon steel, high-speed steel, carbide, diamond - can be used with a sharp finish. Cooling is recommended to allow high cutting speeds, e.g. v = 100-500 m/min for turning and milling, v = 50-100 m/min for drilling.

Gluing: not recommended.

Welding and shaping: feasible.

Available formats

  • polyethylene 500 bars

Technical data

Investigation
Unit of measurement
Value
Base properties
Basic colour
-
-
black-black, confetti
Density
DIN EN ISO 1183
g/cm^3
0.96
Water absorption: saturation in air, 24 h / 96 h, (23ºC)
DIN EN ISO 62
%
<0.01
Flammability rating according to UL94
DIN IEC 60695-11-10
-
HB
Mechanical properties
River crossing
DIN EN ISO 527-2
MPa
~20
Ball indentation hardness
ISO 2039-1
MPa
50
Shore D hardness
DIN EN ISO 868
-
63
Wear resistance
Sand-slurry
-
≥400
Thermal properties
Melting point
ISO 11357-3
ºC
135
Glass transition temperature
DIN 53765
ºC
Thermal conductivity factor
ISO 22007-4:2008
W/ (K.m)
0.4
Coefficient of linear thermal expansion (CLTE): 23 - 80ºC
DIN 53 752
10-⁴ K-¹
1,5 -2
Applicable max. temperature in air - for prolonged use
-
ºC
-60 - +80
Chemical resistance
Chemical resistance at 23ºC: - weak acid
-
-
A
Chemical resistance at 23ºC: - strong acid
-
-
A
Chemical resistance at 23ºC: - weak alkali
ISO 11357-3
ºC
A
Chemical resistance at 23ºC: - strong alkali
-
-
A
Chemical resistance at 23ºC: - aromatic hydrocarbons
-
-
B
Chemical resistance at 23ºC: - alpha hydrocarbons
-
-
B
Chemical resistance at 23ºC: - chlorinated solvents
-
-
B
Chemical resistance at 23ºC: - alcohols
-
-
A
Electrical properties
Dielectric constant
IEC 60250
-
2.3
Dielectric loss factor (50 Hz)
IEC60 250
-
0.0002
Volume resistance
IEC60093
Ω*cm
>1014
Surface resistance
IEC60093
Ω
>1014
Creep current strength, CTI
IEC 60112
-
600
Dielectric strength
IEC 60243
kV/mm
45
Optical properties
No value to display.
Sterilizability
No value to display.
Wear properties
No value to display.

(*) legend:

A - applicable
B - limited application
C - not applicable

Tables
Thickness
Colour
Table size (mm x mm)
Thickness tolerances: -0,1; 0,1
Mass: 1,91 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,2; 0,2
Mass: 2,86 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,2; 0,2
Mass: 3,82 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,2; 0,2
Mass: 4,8 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,3; 0,3
Mass: 5,75 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,3; 0,3
Mass: 7,65 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,4; 0,4
Mass: 9,55 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,4; 0,4
Mass: 11,46 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,5; 0,5
Mass: 14,35 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,7; 0,5
Mass: 19,1 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -0,8; 0,8
Mass: 23,9 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -1,0; 1,0
Mass: 28,65 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -1,1; 1,1
Mass: 33,43 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: -1,3; 1,3
Mass: 38,2 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: 0; 6
Mass: 47,75 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: 0; 6
Mass: 57,3 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: 0; 8
Mass: 66,85 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: 0; 8
Mass: 76,4 kg/m
Table size: 1000 x 2000 mm
Thickness tolerances: 0; 10
Mass: 95,5 kg/m
Table size: 1000 x 2000 mm
Please contact us for the current availability of each size.

The product comparison table cannot be displayed on mobile.

Please switch to desktop view for comparison!