Modified tribological behaviour due to 15% MoS2 in the natural version.
Series of Tecasint 2000: have very high modulus, high rigidity, but compared to series of 1000 reduced moisture adsorption beside higher toughness and machining capability.

Product properties

Color: 
black
Electrically insulator: 
Yes
main area of use: 
Exceptional gliding and wear-proof properties, Raised temperature applications
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.54
Flammability (UL94)-DIN IEC 60695-11-10V0
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 62
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC60093
Surface resistivityΩIEC60093
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:2008
Chemical resistance at 23ºC: deluted acids-
Chemical resistance at 23ºC: strong acids-
Chemical resistance at 23ºC: aliphatic hydrocarbons-
Chemical resistance at 23ºC: chlorin dissolvents-
Chemical resistance at 23ºC: alcohols
Chemical resistance at 23ºC: deluted bases-
Chemical resistance at 23ºC: strong bases-
Chemical resistance at 23ºC: aromatic hydrocarbons-
Melting temperatureºCISO 11357-3
Glass transition temperatureºCDIN 53765370
Specific heatJ/(g.K)ISO 22007-4:2008
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;2
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;24
Max. allowable service temperature in air, short termºC
Max. allowable service temperature in air, long termºC
Min. allowable service temperature in air, long termºC
Heat deflection temperatureºCDIN EN ISO 75, A
Yield stressMPaDIN EN ISO 527-2
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-24400
Elongation at break%DIN EN ISO 527-22.9
Flexural strengthMPaDIN EN ISO 178137
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU
Tensile strengthMPaDIN EN ISO 527-295
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA
Ball indentation hardnessMPaISO 2039-1265
Shore D hardness-DIN EN ISO 868
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods


Diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.0; +0.8 Weight: 0.04 kg/fm Standard length: 250, 395 mm Tolerances on length: 0; 3 Availabilty: Can be ordered