The favorable properties of natural PPE are complemented with a greater degree of rigidity, dimensional stability and hardness.

Product properties

Color: 
natural
Electrically insulator: 
Yes
main area of use: 
Increased dimensional stability, rigidity, Excellent chemical resistance
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.3
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.01 / 0.02
Dielectric constant-IEC 60250-
Volume resistivityΩ*cmIEC600931015
Surface resistivityΩIEC600931015
Dielectric strengthkV/mmIEC 6024325
Dielectric dissipation factor (50 Hz)-IEC60 250-
Comparative tracking index (CTI)-IEC 60112-
Thermal conductivityW/ (K.m)ISO 22007-4:20080.28
Chemical resistance at 23ºC: deluted acids-A*
Chemical resistance at 23ºC: strong acids-A*
Chemical resistance at 23ºC: aliphatic hydrocarbons-B*
Chemical resistance at 23ºC: chlorin dissolvents-A*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-A-B*
Chemical resistance at 23ºC: aromatic hydrocarbons-B*
Melting temperatureºCISO 11357-3n.a.
Glass transition temperatureºCDIN 53765150
Specific heatJ/(g.K)ISO 22007-4:20081.2
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;24
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;24
Max. allowable service temperature in air, short termºC110
Max. allowable service temperature in air, long termºC85
Min. allowable service temperature in air, long termºC- 20
Heat deflection temperatureºCDIN EN ISO 75, A135
Yield stressMPaDIN EN ISO 527-273
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-24100
Elongation at break%DIN EN ISO 527-25
Flexural strengthMPaDIN EN ISO 178116
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU37
Tensile strengthMPaDIN EN ISO 527-273
Compressive strengthMPaEN ISO 604 1% / 2% 23 / 41
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA5
Ball indentation hardnessMPaISO 2039-1205
Shore D hardness-DIN EN ISO 86887
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods


Diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +0.8 Weight: 0.114 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered

Plates


Thickness (mm)
Size of plate (mm x mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: +0.2; +1.1 Weight: 6.15 kg/fm Size of plate: 500 x 3000 mm Tolerances on width: +5; +25 Tolerances on length: 0; +3 Availabilty: Can be ordered