Products / DOCAPRÉN (PP – polypropylene) / DOCAPRÉN-H (PP-H)

DOCAPRÉN-H (PP-H)

Unreinforced PP homopolymer. It has outstanding chemical resistance. Often used in chemical engineering, galvanotechnology, ventilation and equipment manufacturing, laboratory technology.

Product properties

Color: 
grey, natural
Electrically insulator: 
Yes
main area of use: 
Basic stucture material, Excellent chemical resistance

Printable materials

Size table
Technical Data Sheet
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11830.91
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 62< 0,1
Dielectric constant-IEC 602502.4
Volume resistivityΩ*cmIEC600931014
Surface resistivityΩIEC600931014
Dielectric strengthkV/mmIEC 6024345
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112600
Thermal conductivityW/ (K.m)ISO 22007-4:20080.2
Chemical resistance at 23ºC: deluted acids-A*
Chemical resistance at 23ºC: strong acids-A*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-A*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-A*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3165
Glass transition temperatureºCDIN 53765
Specific heatJ/(g.K)ISO 22007-4:20081.7
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;212 - 19
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;2
Max. allowable service temperature in air, short termºC150
Max. allowable service temperature in air, long termºC100
Min. allowable service temperature in air, long termºC0
Heat deflection temperatureºCDIN EN ISO 75, A90
Yield stressMPaDIN EN ISO 527-232
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-21200
Elongation at break%DIN EN ISO 527-2>50
Flexural strengthMPaDIN EN ISO 178
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU
Tensile strengthMPaDIN EN ISO 527-232
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA4
Ball indentation hardnessMPaISO 2039-1
Shore D hardness-DIN EN ISO 86872
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods

Diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: 0.1; 0,5 Weight: 0.062 kg/fm Standard length: 2000 mm Tolerances on length: 0; +3 Availabilty: Stock shape
Add to offer

Tubes

Outer diameter (mm)
Inner diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on outer diameter: +0.6; +2 Tolerances on inner diameter: -2; -0.6 Nominal wall thickness: 10 mm Weight: 1.2 kg/fm Standard length: 2000 mm Tolerances on length: 0; +3 Availabilty: Stock shape
Add to offer

Plates

Thickness (mm)
Size of plate (mm x mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: -0,1; +0,1 Weight: 0.91 kg/fm Size of plate: 1000 x 2000 mm Tolerances on width: +0; +5 Tolerances on length: 0; +3 Availabilty: Stock shape
Add to offer