Products / DOCAPEEK (PEEK - polyether-etherketone) / DOCAPEEK MOD (PEEK + CF + PTFE + graphite)

DOCAPEEK MOD (PEEK + CF + PTFE + graphite)

Genuine bearing grade. It contains carbon fiber, PTFE and graphite filling material.

Product properties

Color: 
black
Electrically insulator: 
Yes
main area of use: 
Raised temperature applications, Exceptional gliding and wear-proof properties, Excellent chemical resistance

Printable materials

Size table
Technical Data Sheet
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.44
Flammability (UL94)-DIN IEC 60695-11-10V0
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.02/ 0.03
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC600931012
Surface resistivityΩIEC600931011
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.82
Chemical resistance at 23ºC: deluted acids-A*
Chemical resistance at 23ºC: strong acids-A-B*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-A*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-A*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3341
Glass transition temperatureºCDIN 53765146
Specific heatJ/(g.K)ISO 22007-4:20081.1
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;23
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;23
Max. allowable service temperature in air, short termºC300
Max. allowable service temperature in air, long termºC260
Min. allowable service temperature in air, long termºC- 60
Heat deflection temperatureºCDIN EN ISO 75, A293
Yield stressMPaDIN EN ISO 527-284
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-25500
Elongation at break%DIN EN ISO 527-23
Flexural strengthMPaDIN EN ISO 178142
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU28
Tensile strengthMPaDIN EN ISO 527-284
Compressive strengthMPaEN ISO 604 1% / 2% 23 / 44
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA
Ball indentation hardnessMPaISO 2039-1250
Shore D hardness-DIN EN ISO 86888
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods

Diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +0.7 Weight: 0.034 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered
Add to offer

Tubes

Outer diameter (mm)
Inner diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on outer diameter: +0.6; +2 Tolerances on inner diameter: -2; -0.6 Nominal wall thickness: 10 mm Weight: 2.9 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered
Add to offer

Plates

Thickness (mm)
Size of plate (mm x mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: +0.2; +0.7 Weight: 4.88 kg/fm Size of plate: 500 x 3000 mm Tolerances on width: +5; +25 Tolerances on length: 0; +3 Availabilty: Stock shape
Add to offer