DOCAPEEK GF30 | Quattroplast

30% glass fiber reinforcement for better dimensional stability and higher strength characteristics.

Product properties

Color:

natural

Electrically insulator:

Yes

main area of use:

Increased dimensional stability, rigidity, Raised temperature applications, Basic stucture material

Printable materials

Size table

Technical Data Sheet

+ See detailed product features - Hide detailed product features

Properties	Unit	Method	Value
Colour
Density	g/cm³	DIN EN ISO 1183	1.53
Flammability (UL94)	-	DIN IEC 60695-11-10	V0
Water absorption in air, 24 h / 96 h, (23ºC)	%	DIN EN ISO 62	0.02/ 0.03
Dielectric constant	-	IEC 60250
Volume resistivity	Ω*cm	IEC60093	10¹⁴
Surface resistivity	Ω	IEC60093	10¹⁴
Dielectric strength	kV/mm	IEC 60243
Dielectric dissipation factor (50 Hz)	-	IEC60 250
Comparative tracking index (CTI)	-	IEC 60112
Thermal conductivity	W/ (K.m)	ISO 22007-4:2008	0.35
Chemical resistance at 23ºC: deluted acids		-	A*
Chemical resistance at 23ºC: strong acids		-	A-B*
Chemical resistance at 23ºC: aliphatic hydrocarbons		-	A*
Chemical resistance at 23ºC: chlorin dissolvents		-	A*
Chemical resistance at 23ºC: alcohols			A*
Chemical resistance at 23ºC: deluted bases		-	A*
Chemical resistance at 23ºC: strong bases		-	A*
Chemical resistance at 23ºC: aromatic hydrocarbons		-	A*
Melting temperature	ºC	ISO 11357-3	341
Glass transition temperature	ºC	DIN 53765	147
Specific heat	J/(g.K)	ISO 22007-4:2008	1.0
Coefficient of linear thermal expansion (CLTE): 23 - 60ºC	m/(m.K)x10^-5	DIN EN ISO 11359-1;2	4
Coefficient of linear thermal expansion (CLTE): 23 - 100ºC	m/(m.K)x10^-5	DIN EN ISO 11359-1;2	4
Max. allowable service temperature in air, short term	ºC		300
Max. allowable service temperature in air, long term	ºC		260
Min. allowable service temperature in air, long term	ºC		- 40
Heat deflection temperature	ºC	DIN EN ISO 75, A	315
Yield stress	MPa	DIN EN ISO 527-2	105
Modulus of elasticity (tensile test)	MPa	DIN EN ISO 527-2	6400
Elongation at break	%	DIN EN ISO 527-2	3
Flexural strength	MPa	DIN EN ISO 178	164
Impact strength, Charpy	kJ/m²	DIN EN ISO 179-1eU	33
Tensile strength	MPa	DIN EN ISO 527-2	105
Compressive strength	MPa	EN ISO 604 1% / 2%	29 / 52
Notched impact strength, charpy	kJ/m²	DIN EN ISO 179-1eA
Ball indentation hardness	MPa	ISO 2039-1	316
Shore D hardness	-	DIN EN ISO 868	92

(*) legend:

A – applicable
B – partially applicable
C – not applicable

Rods

There are no products for the given parameters, please choose another size / color.

Tolerance on diameter: +0.1; +0.7 Weight: 0.036 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered

Add to offer

Plates