Products / DOCAMID (PA – polyamide) / DOCAMID 6GMO (PA 6 G + MoS2 + soot)

DOCAMID 6GMO (PA 6 G + MoS2 + soot)

Apart from the molybdenum disulfide (MoS2) particles, the addition of soot improves the UV resistance of the product. In comparison with the “natural” version, the material is harder and its modulus of elasticity is greater.

Product properties

Color: 
black
Electrically insulator: 
Yes
main area of use: 
Basic stucture material, Exceptional gliding and wear-proof properties

Printable materials

Size table
Technical Data Sheet
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.15
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 62
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC600931014
Surface resistivityΩIEC600931014
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.25
Chemical resistance at 23ºC: deluted acids-B*
Chemical resistance at 23ºC: strong acids-C*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-B*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-B - C*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3216
Glass transition temperatureºCDIN 53765
Specific heatJ/(g.K)ISO 22007-4:20081.7
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;28
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;28
Max. allowable service temperature in air, short termºC170
Max. allowable service temperature in air, long termºC110
Min. allowable service temperature in air, long termºC- 40
Heat deflection temperatureºCDIN EN ISO 75, A95
Yield stressMPaDIN EN ISO 527-282
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-23500
Elongation at break%DIN EN ISO 527-2>35
Flexural strengthMPaDIN EN ISO 178
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU
Tensile strengthMPaDIN EN ISO 527-282
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA>2,5
Ball indentation hardnessMPaISO 2039-1185
Shore D hardness-DIN EN ISO 86883
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods

Diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.3; +1.9 Weight: 2.44 kg/fm Standard length: 1000 mm Tolerances on length: 0; +30 Availabilty: Stock shape
Add to offer

Tubes

Outer diameter (mm)
Inner diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on outer diameter: +0.8; +4 Tolerances on inner diameter: -4; -0.8 Nominal wall thickness: 18 mm Weight: 4.33 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Stock shape
Add to offer

Plates

Thickness (mm)
Size of plate (mm x mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: +0.2; +1.5 Weight: 10.85 kg/fm Size of plate: 1000 x 2000 mm Tolerances on width: +0; +25 Tolerances on length: 0; +3 Availabilty: Stock shape
Add to offer