In comparison with the DOCAMID 6 E material, it has a higher degree of strength and rigidity. It has a better heat and adhesive wear resistance.

Product properties

Color: 
natural, black
Electrically insulator: 
Yes
main area of use: 
Basic stucture material, Raised temperature applications
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.15
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.2 / 0.4
Dielectric constant-IEC 602503.8
Volume resistivityΩ*cmIEC600931014
Surface resistivityΩIEC600931014
Dielectric strengthkV/mmIEC 6024325
Dielectric dissipation factor (50 Hz)-IEC60 2500.015
Comparative tracking index (CTI)-IEC 60112600
Thermal conductivityW/ (K.m)ISO 22007-4:20080.36
Chemical resistance at 23ºC: deluted acids-B*
Chemical resistance at 23ºC: strong acids-C*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-B*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-B - C*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3260
Glass transition temperatureºCDIN 5376547
Specific heatJ/(g.K)ISO 22007-4:20081.5
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;211
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;212
Max. allowable service temperature in air, short termºC170
Max. allowable service temperature in air, long termºC100
Min. allowable service temperature in air, long termºC- 30
Heat deflection temperatureºCDIN EN ISO 75, A100
Yield stressMPaDIN EN ISO 527-285
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-23500
Elongation at break%DIN EN ISO 527-270
Flexural strengthMPaDIN EN ISO 178110
Impact strength, CharpykJ/m2DIN EN ISO 179-1eUNem törik
Tensile strengthMPaDIN EN ISO 527-285
Compressive strengthMPaEN ISO 604 1% / 2% 20 / 35
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA5
Ball indentation hardnessMPaISO 2039-1175
Shore D hardness-DIN EN ISO 86883
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods


Diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +0.6 Weight: 0.017 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Stock shape

Tubes


Outer diameter (mm)
Inner diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerances on outer diameter: +0.8; +2.5 Tolerances on inner diameter: -2.5; -0.8 Nominal wall thickness: 10 mm Weight: 1.91 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Stock shape

Plates


Thickness (mm)
Size of plate (mm x mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: -0,1; +0,1 Weight: 1.2 kg/fm Size of plate: 1000 x 2000 mm Tolerances on width: +5; +25 Tolerances on length: 0; +3 Availabilty: Stock shape