In comparison with the pure PA 6, it has 30% glass fiber filling, as reinforcing material. Due to this, it has a greater degree of rigidity, dimensional stability and creep resistance. The maximum allowed operating temperature is higher, as well.

Product properties

Color: 
black
Electrically insulator: 
Yes
main area of use: 
Increased dimensional stability, rigidity, Basic stucture material
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.36
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.2 / 0.3
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC600931014
Surface resistivityΩIEC600931014
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.41
Chemical resistance at 23ºC: deluted acids-B*
Chemical resistance at 23ºC: strong acids-C*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-B*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-B - C*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3220
Glass transition temperatureºCDIN 5376549
Specific heatJ/(g.K)ISO 22007-4:20081.3
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;26
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;26
Max. allowable service temperature in air, short termºC180
Max. allowable service temperature in air, long termºC100
Min. allowable service temperature in air, long termºC- 30
Heat deflection temperatureºCDIN EN ISO 75, A140
Yield stressMPaDIN EN ISO 527-298
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-25700
Elongation at break%DIN EN ISO 527-25
Flexural strengthMPaDIN EN ISO 178140
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU60
Tensile strengthMPaDIN EN ISO 527-298
Compressive strengthMPaEN ISO 604 1% / 2% 21 / 42
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA
Ball indentation hardnessMPaISO 2039-1232
Shore D hardness-DIN EN ISO 86886
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods


Diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +0.7 Weight: 0.021 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered

Plates


Thickness (mm)
Size of plate (mm x mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: +0.2; +1.1 Weight: 7.61 kg/fm Size of plate: 500 x 3000 mm Tolerances on width: +5; +25 Tolerances on length: 0; +3 Availabilty: Stock shape