Products / DOCAMID (PA – polyamide) / DOCAMID 6 G-H ELS (PA 6 G)

DOCAMID 6 G-H ELS (PA 6 G)

Composite version of magnesium catalitic cast PA 6, which is ranked to the conductive material family. Surface resistance is 106 - 107 Ω.

Product properties

Color: 
black
Electrically insulator: 
No
main area of use: 
Basic stucture material, Non-insulating applications (anti-static, ESD)

Printable materials

Size table
Technical Data Sheet
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.15
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.2 / 0.4
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC60093107
Surface resistivityΩIEC60093106
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.38
Chemical resistance at 23ºC: deluted acids-B*
Chemical resistance at 23ºC: strong acids-C*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-B*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-B - C*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3220
Glass transition temperatureºCDIN 5376540
Specific heatJ/(g.K)ISO 22007-4:20081.7
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;212
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;212
Max. allowable service temperature in air, short termºC170
Max. allowable service temperature in air, long termºC105
Min. allowable service temperature in air, long termºC- 40
Heat deflection temperatureºCDIN EN ISO 75, A
Yield stressMPaDIN EN ISO 527-2
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-2
Elongation at break%DIN EN ISO 527-2
Flexural strengthMPaDIN EN ISO 178
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU
Tensile strengthMPaDIN EN ISO 527-2
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA
Ball indentation hardnessMPaISO 2039-1
Shore D hardness-DIN EN ISO 868
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods

Diameter (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +1.2 Weight: 1.22 kg/fm Standard length: 1000 mm Tolerances on length: 0; +30 Availabilty: Can be ordered
Add to offer

Plates

Thickness (mm)
Size of plate (mm x mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on thickness: +0.3; +2.5 Weight: 25.9 kg/fm Size of plate: 710 x 1170, *1040 x 2040 mm Tolerances on width: +0; +25 Tolerances on length: 0; +3 Availabilty: Can be ordered
Add to offer

Prisms

Cross-section (mm x mm)
Standard length (mm)
Filter by colors
There are no products for the given parameters, please choose another size / color.
Tolerances on sides: +0.2; +1.5 mm Weight: 16.8 kg/fm Standard length: 1000 mm Tolerances on length: 0; +30 Availabilty: Can be ordered
Add to offer