Available only for request. Just like FEP it belongs to the melt fusible material family. It has excellent transparency among fluoropolymers. It has excellent chemical resistance.
Product properties
Color:
natural, translucent
Electrically insulator:
Yes
main area of use:
Excellent chemical resistance
Printable materials
Properties | Unit | Method | Value |
---|---|---|---|
Colour | |||
Density | g/cm3 | ASTM D 792-00 | 2.15 |
Flammability (UL94) | - | DIN IEC 60695-11-10 | V0 |
Water absorption (23ºC) | % | ASTM D 570 | <0.03 |
Volume resistivity | Ω*cm | ASTM D 257 | 1017 |
Surface resistivity | Ω | ASTM D 257 | 1017 |
Dielectric strength | kV/mm | ASTM D 149 | 40 |
Dielectric constant (50-109 Hz) | - | ASTM D 150 | 2 |
Dielectric dissipation factor | - | ASTM D 150 | 0.0002 |
Thermal conductivity | W/ (K.m) | ASTM C 177 | - |
Melting point | ºC | ASTM D4591 | 285 |
Max. allowable service temperature in air, short term | ºC | 232 | |
Max. allowable service temperature in air, long term | ºC | 232 | |
Min. allowable service temperature in air, long term | ºC | - 196 | |
Specific heat (20ºC) | J/(g.K) | ASTM D4591 | - |
Coefficient of linear thermal expansion (CLTE): 25 - 100ºC | m/(m.K)x10-5 | ASTM D 696 | 9 |
Tensile strength | MPa | ASTM D 4894 | 26 |
Shore D hardness | - | ASTM D 2240 | 58 |
Elongation at break (23°C) | % | ASTM D 4894 | 300 |
Elongation at break (250°C) | % | ASTM D 4894 | - |
(*) legend:
- A – applicable
- B – partially applicable
- C – not applicable
Tubes
Filter by colors
There are no products for the given parameters, please choose another size / color.