Optical quality, eliminates the unfavorable characteristics of PMMA (plexiglass). Technically and economically, it is an optimal intermediate between the PMMA and the PC materials. Extremely tough material, its formability and plasticity is better than that of PC. Not UV protected, basic version. It can be used in food industry, as well.
Product properties
Color:
clear, transparent
Electrically insulator:
Yes
Alkategória:
Constructional products
main area of use:
Transparent pavements, architecture, For heat and vacuum molding
Printable materials
Properties | Unit | Method | Value |
---|---|---|---|
Colour | |||
Density | g/cm3 | ISO 1183 | 1.27 |
Water absorption in water (23ºC) | % | ISO 62 | 0,6 |
Water absorption in air (23ºC / 50% RH) | % | ISO 62 | 0,2 |
Refractive index | - | ISO 489 | 1,567 |
Flammability (UL94) | - | DIN IEC 60695-11-10 | HB |
Light transmission in 0.75 mm thickness | % | DIN 5036 | 90 |
Light transmission in 1 mm thickness | % | DIN 5036 | 90 |
Light transmission in 1.5 mm thickness | % | DIN 5036 | 90 |
Light transmission in 2 mm thickness | % | DIN 5036 | 89 |
Light transmission in 3 mm thickness | % | DIN 5036 | 88 |
Light transmission in 4 mm thickness | % | DIN 5036 | 88 |
Light transmission in 5 mm thickness | % | DIN 5036 | 87 |
Light transmission in 6 mm thickness | % | DIN 5036 | 86 |
Light transmission in 8 mm thickness | % | DIN 5036 | 85 |
Light transmission in 10 mm thickness | % | DIN 5036 | 84 |
Light transmission in 12 mm thickness | % | DIN 5036 | 80 |
Light transmission in 15 mm thickness | % | DIN 5036 | - |
Dielectric constant | - | IEC 60250 | 2.6 |
Dielectric dissipation factor (100 Hz) | - | IEC60 250 | - |
Dielectric dissipation factor (1 MHz) | - | IEC60 250 | 0.02 |
Volume resistivity | Ω*cm | IEC60093 | 1015 |
Surface resistivity | Ω | IEC60093 | 1016 |
Dielectric strength | kV/mm | IEC 60243-1 | 20 |
Vicat softening temperature | ºC | ISO 306 | 80 |
Thermal conductivity | W/ (K.m) | ISO 8302 | 0.20 |
Coefficient of linear thermal expansion (CLTE): 23 - 55ºC | m/(m.K)x10-5 | ISO 11359-1;2 | 5 |
Heat deflection temperature (0.45 MPa) | ºC | ISO 75-1, -2 | 70 |
Heat deflection temperature (1.8 MPa) | ºC | ISO 75-1, -2 | 63 |
Chemical resistance at 23ºC: deluted acids | - | A* | |
Chemical resistance at 23ºC: strong acids | - | B* | |
Chemical resistance at 23ºC: aliphatic hydrocarbons | - | A* | |
Chemical resistance at 23ºC: chlorin dissolvents | - | B* | |
Chemical resistance at 23ºC: alcohols | A* | ||
Chemical resistance at 23ºC: deluted bases | - | B* | |
Chemical resistance at 23ºC: strong bases | - | B - C* | |
Chemical resistance at 23ºC: aromatic hydrocarbons | - | A* | |
Yield stress | MPa | ISO 527-1, -2 | >45 |
Modulus of elasticity (tensile test) | MPa | ISO 527-1, -2 | 2020 |
Yield strain | % | ISO 527-1, -2 | 4 |
elongation at break | % | ISO 527-1, -2 | >35 |
Flexural strength | MPa | ISO 178 | 80 |
Flexural modulus | MPa | ISO 178 | 2400 |
Impact strength, Charpy | kJ/m2 | ISO 179-1eU | nem törik |
(*) legend:
- A – applicable
- B – partially applicable
- C – not applicable
Plates
Filter by colors
There are no products for the given parameters, please choose another size / color.