DOCACETAL C PE | Quattroplast

PE additives ensure excellent sliding properties and improved abrasion resistance.

Product properties

Color:

blue

Electrically insulator:

Yes

main area of use:

Exceptional gliding and wear-proof properties, Increased toughness and abrasive wear resistance

Printable materials

Size table

Technical Data Sheet

+ See detailed product features - Hide detailed product features

Properties	Unit	Method	Value
Colour
Density	g/cm³	DIN EN ISO 1183	1.34
Flammability (UL94)	-	DIN IEC 60695-11-10	HB
Water absorption in air, 24 h / 96 h, (23ºC)	%	DIN EN ISO 62	0.05/ 0.1
Dielectric constant	-	IEC 60250
Volume resistivity	Ω*cm	IEC60093	10¹³
Surface resistivity	Ω	IEC60093	10¹³
Dielectric strength	kV/mm	IEC 60243	35
Dielectric dissipation factor (50 Hz)	-	IEC60 250
Comparative tracking index (CTI)	-	IEC 60112	600
Thermal conductivity	W/ (K.m)	ISO 22007-4:2008	0.3
Chemical resistance at 23ºC: deluted acids		-	B*
Chemical resistance at 23ºC: strong acids		-	C*
Chemical resistance at 23ºC: aliphatic hydrocarbons		-	A*
Chemical resistance at 23ºC: chlorin dissolvents		-	B*
Chemical resistance at 23ºC: alcohols			A*
Chemical resistance at 23ºC: deluted bases		-	A*
Chemical resistance at 23ºC: strong bases		-	A*
Chemical resistance at 23ºC: aromatic hydrocarbons		-	A*
Melting temperature	ºC	ISO 11357-3	164
Glass transition temperature	ºC	DIN 53765	-60
Specific heat	J/(g.K)	ISO 22007-4:2008	1.4
Coefficient of linear thermal expansion (CLTE): 23 - 60ºC	m/(m.K)x10^-5	DIN EN ISO 11359-1;2	12
Coefficient of linear thermal expansion (CLTE): 23 - 100ºC	m/(m.K)x10^-5	DIN EN ISO 11359-1;2	13
Max. allowable service temperature in air, short term	ºC		140
Max. allowable service temperature in air, long term	ºC		100
Min. allowable service temperature in air, long term	ºC		- 40
Heat deflection temperature	ºC	DIN EN ISO 75, A	95
Yield stress	MPa	DIN EN ISO 527-2	67
Modulus of elasticity (tensile test)	MPa	DIN EN ISO 527-2	2800
Elongation at break	%	DIN EN ISO 527-2	36
Flexural strength	MPa	DIN EN ISO 178	70
Impact strength, Charpy	kJ/m²	DIN EN ISO 179-1eU	30
Tensile strength	MPa	DIN EN ISO 527-2	67
Compressive strength	MPa	EN ISO 604 1% / 2%	16/ 27
Notched impact strength, charpy	kJ/m²	DIN EN ISO 179-1eA	4
Ball indentation hardness	MPa	ISO 2039-1	174
Shore D hardness	-	DIN EN ISO 868	120

(*) legend:

A – applicable
B – partially applicable
C – not applicable

Rods

There are no products for the given parameters, please choose another size / color.

Tolerance on diameter: +0.1; +0.7 Weight: 0.12 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered

Add to offer

Plates