Detailed product properties

20% PI content on PTFE matrix.
Series of Tecasint 8000: matrix of PTFE reinforced with PI powder. Extreme chemical resistance and good tribological properties and machinability.

Color: 
Electrically insulator: 
Yes
Felhasználási terület: 

Available product types

Rods

Diameter

[mm]
Tolerance on diameter

[mm]
Weight

[kg/m]
Standard length

[mm]
Tolerances on length

%
Stock shape /
Can be ordered
Color
6 +0.0 +0.8 0.05 250, 395 0 3 Can be ordered ochre
6.3 +0.0 +0.8 0.06 250, 395 0 3 Can be ordered ochre
8 +0.0 +0.8 0.09 250, 395 0 3 Can be ordered ochre
9.5 +0.0 +0.8 0.13 250, 395 0 3 Can be ordered ochre
10 +0.0 +0.8 0.15 250, 395 0 3 Can be ordered ochre
12 +0.0 +0.8 0.21 250, 395 0 3 Can be ordered ochre
12.7 +0.0 +0.8 0.24 250, 395 0 3 Can be ordered ochre
15 +0.0 +0.8 0.33 250, 395 0 3 Can be ordered ochre
15.8 +0.0 +0.8 0.37 250, 395, 500, 750, 1000 0 3 Can be ordered ochre
19.1 +0.0 +0.8 0.54 250, 395, 500, 750, 1000 0 3 Can be ordered ochre
25 +0.0 +0.8 0.92 250, 500, 750, 1000 0 3 Can be ordered ochre
25.4 +0.0 +0.8 0.95 250, 500, 750, 1000 0 3 Can be ordered ochre
30 +0.0 +0.8 1.33 250, 500, 750, 1000 0 3 Can be ordered ochre
35 +0.0 +0.8 1.81 250, 500, 750, 1000 0 3 Can be ordered ochre
38.1 +0.0 +0.8 2.14 250, 500, 750, 1000 0 3 Can be ordered ochre
40 +0.0 +0.8 2.36 250, 500, 750, 1000 0 3 Can be ordered ochre
45 +0.0 +0.8 2.99 250, 500, 750, 1000 0 3 Can be ordered ochre
50 +0.0 +1.0 3.69 250, 500, 750, 1000 0 3 Can be ordered ochre
50.8 +0.0 +1.0 3.81 250, 500, 750, 1000 0 3 Can be ordered ochre
55 +0.0 +1.0 4.46 250, 500, 750, 1000 0 3 Can be ordered ochre
60 +0.0 +1.0 5.31 250, 500, 750, 1000 0 3 Can be ordered ochre
65 +0.0 +1.0 6.24 250, 500, 750, 1000 0 3 Can be ordered ochre
Stock shape means that product is regularly produced. You should ask for the current stocks on request.

Plates

Thickness

[mm]
Tolerances on thickness

[mm]
Weight

[kg/m]
Size of plate

[mm]
Tolerances on width

[mm]
Tolerances on length

%
Stock shape /
Can be ordered
Color
10 +0 +1 5.7 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered ochre
20 +0 +1 11.39 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered ochre
25 +0 +1 14.24 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered ochre
30 +0 +1 17.09 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered ochre
40 +0 +1 22.79 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered ochre
Stock shape means that product is regularly produced. You should ask for the current stocks on request.
Product properties
PropertiesUnitMethodValue
Colourochre
Densityg/cm3DIN EN ISO 11831.88
Flammability (UL94)-DIN IEC 60695-11-10V0
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 62
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC600931018
Surface resistivityΩIEC60093
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.25
Chemical resistance at 23ºC: deluted acids-
Chemical resistance at 23ºC: strong acids-
Chemical resistance at 23ºC: aliphatic hydrocarbons-
Chemical resistance at 23ºC: chlorin dissolvents-
Chemical resistance at 23ºC: alcohols
Chemical resistance at 23ºC: deluted bases-
Chemical resistance at 23ºC: strong bases-
Chemical resistance at 23ºC: aromatic hydrocarbons-
Melting temperatureºCISO 11357-3
Glass transition temperatureºCDIN 53765-20
Specific heatJ/(g.K)ISO 22007-4:20081
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;2
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;2
Max. allowable service temperature in air, short termºC
Max. allowable service temperature in air, long termºC250
Min. allowable service temperature in air, long termºC
Heat deflection temperatureºCDIN EN ISO 75, A
Yield stressMPaDIN EN ISO 527-2
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-2
Elongation at break%DIN EN ISO 527-2200
Flexural strengthMPaDIN EN ISO 178
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU
Tensile strengthMPaDIN EN ISO 527-215
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA
Ball indentation hardnessMPaISO 2039-1
Shore D hardness-DIN EN ISO 868