Detailed product properties

It contains 40w% graphite comparing to the natural Tecasint 2011.
Series of Tecasint 2000: have very high modulus, high rigidity, but compared to series of 1000 reduced moisture adsorption beside higher toughness and machining capability.

Color: 
black
Electrically insulator: 
Yes
Felhasználási terület: 

Available product types

Rods

Diameter

[mm]
Tolerance on diameter

[mm]
Weight

[kg/m]
Standard length

[mm]
Tolerances on length

%
Stock shape /
Can be ordered
Color
6 +0.0 +0.8 0.04 250, 395 0 3 Stock shape black
6.3 +0.0 +0.8 0.05 250, 395 0 3 Can be ordered black
8 +0.0 +0.8 0.08 250, 395 0 3 Can be ordered black
9.5 +0.0 +0.8 0.11 250, 395 0 3 Can be ordered black
10 +0.0 +0.8 0.12 250, 395 0 3 Stock shape black
12 +0.0 +0.8 0.18 250, 395 0 3 Stock shape black
12.7 +0.0 +0.8 0.2 250, 395 0 3 Can be ordered black
15 +0.0 +0.8 0.28 250, 395 0 3 Stock shape black
15.8 +0.0 +0.8 0.31 250, 395, 500, 750, 1000 0 3 Can be ordered black
19.1 +0.0 +0.8 0.46 250, 395, 500, 750, 1000 0 3 Can be ordered black
25 +0.0 +0.8 0.78 250, 500, 750, 1000 0 3 Stock shape black
25.4 +0.0 +0.8 0.81 250, 500, 750, 1000 0 3 Can be ordered black
30 +0.0 +0.8 1.12 250, 500, 750, 1000 0 3 Can be ordered black
35 +0.0 +0.8 1.53 250, 500, 750, 1000 0 3 Can be ordered black
38.1 +0.0 +0.8 1.81 250, 500, 750, 1000 0 3 Can be ordered black
40 +0.0 +0.8 2 250, 500, 750, 1000 0 3 Stock shape black
45 +0.0 +0.8 2.53 250, 500, 750, 1000 0 3 Can be ordered black
50 +0.0 +1.0 3.12 250, 500, 750, 1000 0 3 Stock shape black
50.8 +0.0 +1.0 3.22 250, 500, 750, 1000 0 3 Stock shape black
55 +0.0 +1.0 3.78 250, 500, 750, 1000 0 3 Can be ordered black
60 +0.0 +1.0 4.49 250, 500, 750, 1000 0 3 Can be ordered black
65 +0.0 +1.0 5.27 250, 500, 750, 1000 0 3 Can be ordered black
70 +0.0 +1.0 6.12 250, 500, 750, 1000 0 3 Can be ordered black
Stock shape means that product is regularly produced. You should ask for the current stocks on request.

Plates

Thickness

[mm]
Tolerances on thickness

[mm]
Weight

[kg/m]
Size of plate

[mm]
Tolerances on width

[mm]
Tolerances on length

%
Stock shape /
Can be ordered
Color
10 +0 +1 4.82 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered black
20 +0 +1 9.64 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered black
25 +0 +1 12.04 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered black
30 +0 +1 14.45 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered black
40 +0 +1 19.27 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered black
50 +0 +1 24.09 300 x 250, 300 x 500, 300 x 1000 +0 +3 0 +3 Can be ordered black
Stock shape means that product is regularly produced. You should ask for the current stocks on request.
Product properties
PropertiesUnitMethodValue
Colourblack
Densityg/cm3DIN EN ISO 11831.59
Flammability (UL94)-DIN IEC 60695-11-10V0
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 62
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC60093
Surface resistivityΩIEC60093
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:2008
Chemical resistance at 23ºC: deluted acids-
Chemical resistance at 23ºC: strong acids-
Chemical resistance at 23ºC: aliphatic hydrocarbons-
Chemical resistance at 23ºC: chlorin dissolvents-
Chemical resistance at 23ºC: alcohols
Chemical resistance at 23ºC: deluted bases-
Chemical resistance at 23ºC: strong bases-
Chemical resistance at 23ºC: aromatic hydrocarbons-
Melting temperatureºCISO 11357-3
Glass transition temperatureºCDIN 53765370
Specific heatJ/(g.K)ISO 22007-4:2008
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;2
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;2
Max. allowable service temperature in air, short termºC
Max. allowable service temperature in air, long termºC
Min. allowable service temperature in air, long termºC
Heat deflection temperatureºCDIN EN ISO 75, A
Yield stressMPaDIN EN ISO 527-2
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-26300
Elongation at break%DIN EN ISO 527-22.1
Flexural strengthMPaDIN EN ISO 17887.5
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU14.2
Tensile strengthMPaDIN EN ISO 527-265
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA3.3
Ball indentation hardnessMPaISO 2039-1
Shore D hardness-DIN EN ISO 868