Detailed product properties

It has higher mechanical properties than GF30 and its sliding and wear behavior is excellent. Reduced surface and volume resistivity.

Color: 
black
Electrically insulator: 
No
Felhasználási terület: 
,

Available product types

Rods

Offer request
Diameter

[mm]
Tolerance on diameter

[mm]
Weight

[kg/m]
Standard length

[mm]
Tolerances on length

%
Stock shape /
Can be ordered
Color
Add to offer 5 +0.1 +0.7 0.032 1000, 3000 0 +3 Can be ordered black
Add to offer 6 +0.1 +0.7 0.045 1000, 3000 0 +3 Can be ordered black
Add to offer 8 +0.1 +0.8 0.079 1000, 3000 0 +3 Can be ordered black
Add to offer 10 +0.1 +0.8 0.121 1000, 3000 0 +3 Can be ordered black
Add to offer 12 +0.2 +0.9 0.174 1000, 3000 0 +3 Can be ordered black
Add to offer 15 +0.2 +0.9 0.267 1000, 3000 0 +3 Can be ordered black
Add to offer 16 +0.2 +0.9 0.303 1000, 3000 0 +3 Stock shape black
Add to offer 18 +0.2 +0.9 0.38 1000, 3000 0 +3 Can be ordered black
Add to offer 20 +0.2 +0.9 0.467 1000, 3000 0 +3 Stock shape black
Add to offer 22 +0.2 +1.2 0.57 1000, 3000 0 +3 Can be ordered black
Add to offer 25 +0.2 +1.2 0.73 1000, 3000 0 +3 Can be ordered black
Add to offer 28 +0.2 +1.2 0.911 1000, 3000 0 +3 Can be ordered black
Add to offer 30 +0.2 +1.2 1.04 1000, 3000 0 +3 Stock shape black
Add to offer 32 +0.2 +1.2 1.18 1000, 3000 0 +3 Can be ordered black
Add to offer 36 +0.2 +1.6 1.51 1000, 3000 0 +3 Can be ordered black
Add to offer 40 +0.2 +1.6 1.85 1000, 3000 0 +3 Stock shape black
Add to offer 45 +0.3 +2.0 2.35 1000, 3000 0 +3 Can be ordered black
Add to offer 50 +0.3 +2.0 2.89 1000, 3000 0 +3 Can be ordered black
Add to offer 56 +0.3 +2.0 3.61 1000, 3000 0 +3 Can be ordered black
Add to offer 60 +0.3 +2.5 4.17 1000, 3000 0 +3 Can be ordered black
Add to offer 65 +0.3 +2.5 4.87 1000, 3000 0 +3 Can be ordered black
Add to offer 70 +0.3 +2.5 5.64 1000, 3000 0 +3 Can be ordered black
Add to offer 80 +0.4 +3.0 7.38 1000, 3000 0 +3 Can be ordered black
Add to offer 90 +0.5 +3.4 9.35 1000, 3000 0 +3 Can be ordered black
Stock shape means that product is regularly produced. You should ask for the current stocks on request.

Plates

Offer request
Thickness

[mm]
Tolerances on thickness

[mm]
Weight

[kg/m]
Size of plate

[mm]
Tolerances on width

[mm]
Tolerances on length

%
Stock shape /
Can be ordered
Color
Add to offer 20 +0.3 +1.5 15.15 500 x 3000 +5 +25 0 +3 Stock shape black
Add to offer 30 +0.5 +2.5 22.83 500 x 3000 +5 +25 0 +3 Can be ordered black
Add to offer 40 +0.5 +2.5 30.1 500 x 3000 +5 +25 0 +3 Can be ordered black
Stock shape means that product is regularly produced. You should ask for the current stocks on request.
Product properties
PropertiesUnitMethodValue
Colourblack
Densityg/cm3DIN EN ISO 11831.38
Flammability (UL94)-DIN IEC 60695-11-10V0
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.02/ 0.03
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC600931010
Surface resistivityΩIEC600931011
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.66
Chemical resistance at 23ºC: deluted acids-A
Chemical resistance at 23ºC: strong acids-A-B
Chemical resistance at 23ºC: aliphatic hydrocarbons-A
Chemical resistance at 23ºC: chlorin dissolvents-A
Chemical resistance at 23ºC: alcoholsA
Chemical resistance at 23ºC: deluted bases-A
Chemical resistance at 23ºC: strong bases-A
Chemical resistance at 23ºC: aromatic hydrocarbons-A
Melting temperatureºCISO 11357-3341
Glass transition temperatureºCDIN 53765147
Specific heatJ/(g.K)ISO 22007-4:20081.2
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;24
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;24
Max. allowable service temperature in air, short termºC300
Max. allowable service temperature in air, long termºC260
Min. allowable service temperature in air, long termºC- 40
Heat deflection temperatureºCDIN EN ISO 75, A310
Yield stressMPaDIN EN ISO 527-2122
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-26800
Elongation at break%DIN EN ISO 527-27
Flexural strengthMPaDIN EN ISO 178193
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU62
Tensile strengthMPaDIN EN ISO 527-2122
Compressive strengthMPaEN ISO 604 1% / 2% 25 / 47
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA
Ball indentation hardnessMPaISO 2039-1355
Shore D hardness-DIN EN ISO 86896