Product properties

Nano-composite cast polyamide 6 with improved sliding properties and wear resistance.

Color: 
natural
Electrically insulator: 
Yes
main area of use: 
Exceptional gliding and wear-proof properties, Basic stucture material, Increased toughness and abrasive wear resistance
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.15
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 620.2 / 0.4
Dielectric constant-IEC 60250
Volume resistivityΩ*cmIEC600931014
Surface resistivityΩIEC600931014
Dielectric strengthkV/mmIEC 60243
Dielectric dissipation factor (50 Hz)-IEC60 250
Comparative tracking index (CTI)-IEC 60112
Thermal conductivityW/ (K.m)ISO 22007-4:20080.38
Chemical resistance at 23ºC: deluted acids-B*
Chemical resistance at 23ºC: strong acids-C*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-B*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-B - C*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3220
Glass transition temperatureºCDIN 5376540
Specific heatJ/(g.K)ISO 22007-4:20081.7
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;212
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;212
Max. allowable service temperature in air, short termºC170
Max. allowable service temperature in air, long termºC105
Min. allowable service temperature in air, long termºC- 40
Heat deflection temperatureºCDIN EN ISO 75, A
Yield stressMPaDIN EN ISO 527-285
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-23200
Elongation at break%DIN EN ISO 527-2100
Flexural strengthMPaDIN EN ISO 178
Impact strength, CharpykJ/m2DIN EN ISO 179-1eUNem törik
Tensile strengthMPaDIN EN ISO 527-285
Compressive strengthMPaEN ISO 604 1% / 2% 19 / 36
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA11
Ball indentation hardnessMPaISO 2039-1
Shore D hardness-DIN EN ISO 86880
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods


Diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +1.2 Weight: 1.22 kg/fm Standard length: 1000 mm Tolerances on length: 0; +30 Availabilty: Can be ordered