Product properties

By adding glass fibers, the dimensional stability, hardness and strength of PA12 was improved in comparison with the “natural” version.

Color: 
natural
Electrically insulator: 
No
main area of use: 
Increased dimensional stability, rigidity, Basic stucture material
+ See detailed product features- Hide detailed product features
PropertiesUnitMethodValue
Colour
Densityg/cm3DIN EN ISO 11831.25
Flammability (UL94)-DIN IEC 60695-11-10HB
Water absorption in air, 24 h / 96 h, (23ºC)%DIN EN ISO 62
Dielectric constant-IEC 602504.1
Volume resistivityΩ*cmIEC600931015
Surface resistivityΩIEC600931014
Dielectric strengthkV/mmIEC 6024340
Dielectric dissipation factor (50 Hz)-IEC60 2500.031
Comparative tracking index (CTI)-IEC 60112600
Thermal conductivityW/ (K.m)ISO 22007-4:20080.3
Chemical resistance at 23ºC: deluted acids-B*
Chemical resistance at 23ºC: strong acids-C*
Chemical resistance at 23ºC: aliphatic hydrocarbons-A*
Chemical resistance at 23ºC: chlorin dissolvents-B*
Chemical resistance at 23ºC: alcoholsA*
Chemical resistance at 23ºC: deluted bases-A*
Chemical resistance at 23ºC: strong bases-B - C*
Chemical resistance at 23ºC: aromatic hydrocarbons-A*
Melting temperatureºCISO 11357-3178
Glass transition temperatureºCDIN 53765
Specific heatJ/(g.K)ISO 22007-4:2008
Coefficient of linear thermal expansion (CLTE): 23 - 60ºCm/(m.K)x10-5DIN EN ISO 11359-1;25
Coefficient of linear thermal expansion (CLTE): 23 - 100ºCm/(m.K)x10-5DIN EN ISO 11359-1;25
Max. allowable service temperature in air, short termºC150
Max. allowable service temperature in air, long termºC100
Min. allowable service temperature in air, long termºC- 40
Heat deflection temperatureºCDIN EN ISO 75, A130
Yield stressMPaDIN EN ISO 527-260
Modulus of elasticity (tensile test)MPaDIN EN ISO 527-24200
Elongation at break%DIN EN ISO 527-215
Flexural strengthMPaDIN EN ISO 178
Impact strength, CharpykJ/m2DIN EN ISO 179-1eU
Tensile strengthMPaDIN EN ISO 527-260
Compressive strengthMPaEN ISO 604 1% / 2%
Notched impact strength, charpykJ/m2DIN EN ISO 179-1eA5
Ball indentation hardnessMPaISO 2039-1125
Shore D hardness-DIN EN ISO 86879
(*) legend:
  • A – applicable
  • B – partially applicable
  • C – not applicable

Rods


Diameter (mm)
Filter by colors

There are no products for the given parameters, please choose another size / color.
Tolerance on diameter: +0.1; +0.7 Weight: 0.07 kg/fm Standard length: 1000, 3000 mm Tolerances on length: 0; +3 Availabilty: Can be ordered